Ray's Camper Stuff
Page 6
Bal Stabilizer
The next mod came about to relive some of the springiness to the floor. The E3 is 21+ feet long and there is a lot of room between the front and rear stabilizer jacks. as a result if you have a weight challenged better half walking around, it causes the frame to flex in the middle. By adding the center jacks, the problem was solved
So I got the Jacks from PPL for $129 You need the 30 inch ones for the E3. The other ones are two short.
To install them:
Raise them up to just where they contact the frame. Adjust as
needed to meet the frame. Drill two holes on each side and install the self
taping screws. You can also weld if you want, but I thing that would be way over
kill
Total time to install was under 30 minutes. A bit more if you weld em on. Has to be one of the easiest mods I've done. This one mod made the floor rock solid. I'd even have to say that it made the bunks a bit more stable to.